Wednesday, 22 March 2017

How to make it simple but effective?

Now, I will show you how to make Transmit analog audio/video from one tv to another tv by wireless.
First you need on sets Wireless AV Sender, if you have two or more tv, then you will need more receiver, it’s depends on your tv qty, one set tv need one pcs receiver.
Second,  Analyze your usage environment, if you will use tv in different rooms and different floor, you should choose the transmitter with long transmission range, Example: if you wanna use at different floor, then you have to choose PAT-260, this mode support used at second floor, but you have to pay attention is 1 floor is Max, after penetrate one floor, the transmission range do not over 50 meter.

Built-in worldwide 2.4GHz wireless ISM Band RF module
8 Channels for 2.4GHz frequency channel switching
Transmission distance up to 150meter
NTSC / PAL video format
Support IR Remote Control
Support Analog/Digital Signal Input and Output

Third, after choose the correct models, then you just need connect the AV cable with device, transmitter connect with signal source, receiver connect with monitor. if no signal, Pls make sure av cable matched correct jack, if not will lead to no signal or not video, then you need check the av connection is correct or change another av cable.

Finally, just connect both transmitter and receiver getting the power, and check both power adapter and device's indicator lights on or not.Pls confirm PAKITE power adapter is 5V/1A.

PS: PAT-260 Wireless AV Sender is support IR Remote control, if you can not channels at tv end when the tv and set top box in the different rooms, pls place the transmitter above at the signal source and keep the indicator light of transmitter and the infrared light of signal source in a line, but the transmitter bulge 2 cm.

If any questions about wireless av sender welcome contact with PAKITE, you can leave message at, once received your message, our sales will contact with you as soon as possible.

No comments:

Post a Comment